Description
Covered Bus bar with capacity of 250 amps and made with a durable plastic cover.
Ideal for connecting multiple batteries to your inverter in parallel.
M10 main connections and M5 smaller connections which are ideal for monitoring or tapping the battery pack for other use. You do need to remove the smaller connection point to connect the M10 lugs.
Lugs not supplied but you can ask for these and we can send some.
Notes: Most inverters will have M8 connections and therefore you may need to change the lugs from M8 to M10 to make the connection and then you will need to have cables with M10 to M8 to the inverter.
~if you cut the cables from the battery packs that fit the inverter, you then M10 the end of this cable to make the join between the two. You then need a M10 on the battery cable to the bus bar, You would need 2 M10 lugs to do this. We do make cables to order.
Keep the cables from the battery to the bus bar even length. This means locating the bus bar near to the battery, while having a longer single cable to the inverter.
If your battery does not have a breaker build in. it is wise to install breakers for each battery before the bus bar.
Reviews
There are no reviews yet.