1.5kwp Solar array and Mount – 3.6m

Description

KIT:
3 x 500w bifacial panels ( all black).
2 x 3.55  panels Rails
8 x  Roof Hooks
8 x Panel clamps
Delivery included

Installing solar for the DIYer can be less than straight forward, For the most part they will be installed at a low level and depending on the roof type, the fixings will differ depending on if your worried about leaks.
In this kit we are using pan tile hooks. These hooks can be installed on many roof surfaces with or without tiles… They have a dual screw single point mount with a arm to fix the rail.
Once you fix the hooks (ensuring the hooks are aligned.. using the rail as a guide and measure from a straight edge, like the roof edge) you then slide on the Rail and tighten this into place. The panels are them lifted on to the rails and lock them into place using the universal clamps. The rail spacing should be around 110cm apart.

The complete installation should take around 50 minutes.

Other things to consider:
Cable ties for cable management.
Cable entry point ( if required).
Grounding/Earthing (if required)

The rail is 3.55 meters however the panels and the clamps are shorter so the rails can be trimmed. panels and clamps are 3.48m

Stacking height is 209cm.  This is the panel height,  when you wish two sets one above the other (4.18cm) panels should be 20cm from any edge of the roof.